Current Clamp for up to 3000 A / colour-display / expandable memory / voltage measurement with harmonics-analyser for up to 1000 V / up to 2 GB memory

The Current Clamp Kyoritsu 6310 is used for the analysis of performance and harmonics. The Current Clamp can safely measure currents of up to 3000 A. Besides the performance analysis, the Current Clamp can execute a complete network analysis. The Current Clamp also measures the phase angle, harmonics, apparent power, active power and work. All measurable variables are shown on the colour display of the Current Clamp 6310. The Current Clamp built-in memory has a size of 1.8 MB therefore is sufficient for a data record of about 2 days. The memory of the Current Clamp can be extended by an additional CF card. The Maximum memory capacity is 2 GB. The Current Clamp is the large version of the power meter Kyoritsu 6300. If you have any questions concerning the Current Clamp, please take a look at the following technical data.

– Harmonic Analysis
– Measurement of voltage and current
– Up to 3000 A
– Long recording duration > 1 year

– Frequency measurement up to 40 … 70 Hz
– Memory of up to 2 GB
– USB interface

Technical Specification Current Clamp Kyoritsu 6310

Voltage measurement

Range

150 V / 300 V / 600 V / 1000 V

Display

4 digits

Accuracy (45 … 65 Hz)

± 0.3 % rdg ± 0.2 % f.s.

Overload protection

1200 V

Current measurement

Range converter Flex 3000A

300 A / 1000 A / 3000 A

Display

4 digits

Accuracy (45 … 65 Hz)

± 0.3% rdg ± 0.2% f.s.
plus measurement uncertainty of the current transformer

Active Power

Range

Range voltage x current range

Display

4 digits

Accuracy (45 … 65 Hz sine wave)

± 0.5% rdg ± 0.2% f.s.
plus measurement uncertainty of the current transformer

Frequency

Range

40 … 70 Hz

Display

4 digits

Accuracy

± 0.5% f.s.

General technical specification for Current Clamp

Display

320 x 240 (RGB) pixels, 3.5-inch colour display

Memory interval (adjustable)

1/2/5/10/15/20/30 seconds
1/2/5/10/15/20/30/60 minutes

Viewing Time

1 second

Interface

USB

Memory

1.8 MB (internal, enough for about 2 days at 30 min)
up to 2 GB (expandable via CF card)

Security

CAT III / 600 V

Standardization

IEC / EN 61010-1
IEC / EN 61010-031

Power supply

100 … 240 V AC 50/60 Hz
6 x 1.5V AA battery

Standby battery operation

about 7 hours

Operating conditions

0 … 50 ° C / 85% RH non-condensing

Storage Conditions

-20 … +60 ° C / 85% RH non-condensing

Dimensions

175 x 120 x 65 mm

Weight

about 800 g with battery

Delivery content of the Current Clamp Kyoritsu 6310

1 Current Clamp Kyoritsu 6310 / 3000 A with a flex converter set x 3000 A,
1 x voltage test lead set (red / green / black / blue), 1 x alligator clip set, 1 x power cable, 6 x AA batteries 1.5 V, 1 x CD-ROM (software KEW PQA MASTER, instructions), 1 x USB cable, 1 x Soft Case, 1 x Quick Start Guide, 32 x cable markers,
1 x Card Reader